RWN Property Services is the New England dealer for the Dipperfox stump drill


The new performance standard in stump removal - up to 180 stumps per hour!
Dipperfox introduces brand new technology for stump removal that is 8-10 times more efficient that other methods currently used. The outcome is similar to that of a traditional stump grinder – the whole stump and roots will be cut into 30-50mm chips, but unlike with traditional stump grinders, the whole process will take 20-120 seconds. Plus, Dipperfox is capable of drilling 900mm under the chip to smash the roots. Its blades are made from wear-resistant steel that is basically rock-proof!
Friend of the forest
Dipperfox is easy on the soil. Its rotating blades crush and push all the wood residue into the ground and don’t leave any craters or voids behind. The site needs no additional equipment for cleanup and is ready for planting new trees.
Safely removes stumps in difficult locations
Use Dipperfox to remove stumps in urban areas and locations with small safe zones. Dipperfox has a low revolving speed with a max of 60 RPM which prevents high speed debris. In the event the blade hits a rock, it will be pushed away rather than ricocheting. This allows you to create a much smaller risk zone compared to horizontal high speed grinders.
2 models to fit your needs

Dipperfox Stump Crusher 850 Pro
for 12 ton excavators and up
Cutting edge technology that clears tree stumps in seconds!
Dipperfox Stump Grinder is a professional tool for excavators. Attached to a dipper arm, this stump grinder will make any heavy equipment user happy. Its design improves efficiency and speed, reducing time and cost. It’s also more environmentally friendly, greatly reducing clean up and overall impact to work sites. If you’re in the market to buy a stump grinder, you definitely want to check out Dipperfox!
- 10 times faster than other known stump removal methods
- No waste to utilize left behind (grinded stump will be used as fertilizer for the ground)
- Suitable for excavators between 14 to 30 tons
- Automatic speed/torque adjustment (built-in long lasting 2-speed planetary gearbox)
- No electricity, no cables to connect (fully hydraulic operation)
- Unit can be stored in outside conditions (no sensitive electronics, no corrosion on contacts)
- Boltable consumables (double-sided cutting blades)
- Easy to maintain - long (250 hour or 2 times a year) oil change cycle
- Light weight (575 kg/1267 lb) allows Dipperfox Stump Crusher 850 Pro to be transported with pick-up truck or trailer
- Reduced noise pollution, compared with grinders – less strain on surrounding ears
- Unique in its class – patented technology
- Developed and engineered by an excavator entrepreneur, who has 20+ years of experience in excavator fleet management
- Optimal technical requirements for the best operating efficiency: oil flow 220L/min - 58gpm and 300bar/4351PSI pressure @2000rpm

Dipperfox Stump Crusher 600
for smaller machines like skidsteers and backhoes
Designed for use in neighborhoods, towns and urban areas where large excavators are too big and access is limited.
This model requires a smaller carrier with the Dipperfox unit weighing just 285kg.
It is safer, less noisy and more efficient than other stump grinders. This is due to the Dipperfox having a low revolving speed with a max of 60 RPM which prevents high speed debris and in the event of the blade hitting any rock, it will be pushed away rather than ricocheting. Therefore, this allows you to create a much smaller risk zone compared to horizontal high speed grinders.
The Stump Crusher 600 is also much faster at removing stumps than other grinders and allows a drilling depth of 500mm below ground level. This allows you to plant a sapling in the footprint of the previous tree.
A helpful link for converting bar to psi https://www.unitconverters.net/pressure/bar-to-psi.htm
Ready for Dipperfox?
Contact RWN today for info and ordering
See Dipperfox outperform the competition!
Get even more out of Dipperfox with these attachments!
(coming soon)
Log splitter
Cone-splitter attachment for Dippefox engine. The splitting cone is constructed from different modules/slices with different thred pich. So based on the hardness of wood, each user can combine the most effective gear to split the log.
Estimated Lead Time: August/September

Video of a non-Dipperfox log splitter to illustrate function. Dipperfox version coming soon!
Auger drill with cardan shaft
Auger drill attachment together with 15 degree tilt cardan shaft. Such soution allows to drill also vertical holes.
Estimated Lead Time: November

Video of a non-Dipperfox auger drill to illustrate function. Dipperfox version coming soon!
Pitting head/soil aerator
Pitting head with central pin for attaching auger drill or deep aerator
Estimated Lead Time: April/May

Video of a non-Dipperfox pitting head/soil aerator to illustrate function. Dipperfox version coming soon!
Drum grinder
Grinder for tarmac, concrete or frozen ground
Estimated Lead Time: June
